|
|
|
|
|
|
|
|
|
|
Toll Free:
800-603-5045
Fax: 727-573-3058
Email: sales@brookfieldtool.com
Printable Tapholder Price Sheet
These slip-in tap holders bring you the same money-saving, time-saving advantages as Brookfield tool holders - plus a foolproof sliding-spring assembly that compensates for thread-camming variations. Each unit tightly grips a wide range of tap sizes, without accessories or bushings. Axially-true alignment is automatic in the Brookfield "V". You can use close-held or extended taps in Brookfield tap holders. There's no need to square off the ends as with some bushing and collet-type holders.
Tap Holder (non releasing) Specifications and Prices - March 2006
| Model No. | Holding Min. | Range Max. |
Shank Dia. |
*Pull* Out |
Physical Dimensions |
Price * |
||||||
| A | B | C | D | E | F | G | ||||||
| TA-3 | #0 | 3/16 | 5/8 | 11/64 | 5/8 | 1-1/8 | 1-1/8 | 7/32 | 1-1/2 | 11-16 | 11/16 | $194.00 |
| TA-8 | #4 | 1/2 | 5/8 | 1/4 | 5/8 | 1-1/4 | 1-3/16 | 25/64 | 2 | 1 | 1 | $230.00 |
| TA-10 | #6 | 5/8 | 3/4 | 11/32 | 3/4 | 1-1/2 | 1-9/16 | 1/2 | 2 | 1 | 1 | $242.00 |
| TA-16 | 1/4 | 7/8 | 1 | 29.64 | 1 | 2 | 2-1/16 | 41/64 | 2-5/8 | 1-1/2 | 1-1/2 | $298.00 |
Please specify model number and listed price when ordering. All orders shipped FOB Clearwater, Florida. Operating instructions and appropriate hex wrench are included with every tap holder. Excessive or improper timing of the turret travel relative to tap travel will damage the tap holder. Please refer to the *pullout* limitations for each tap holder before ordering.
 |
Tap Holder
Parts and Prices
|
| TA-3 | TA-8 | TA-10 | TA-16 | |||||
| Part No. | Price * | Part No. | Price * | Part No. | Price * | Part No. | Price * | |
| Shank Assembly | 2534 | $124.00 | TA-8-1Y | $145.00 | TA-10-1Y | $160.00 | TA-16-1Y | $203.00 |
| Body | 2012 | $49.40 | 3012 | $62.50 | 4012 | $56.80 | 5012 | $68.00 |
| Clamp | 2023 | $14.30 | 3023 | $15.50 | 4023 | $15.90 | 5023 | $22.00 |
| Body Screw | 2005 | $6.40 | 3005 | $6.70 | 4005 | $6.90 | 5005 | $7.80 |
| Bevel Washer | 2006 | $1.35 | 3406 | $1.90 | 3406 | $1.90 | 5006 | $2.20 |
| Clamp Screw | 2007 | $0.78 | 3407 | $0.98 | 3407 | $.98 | 5007 | $1.20 |
| Back Plate | 2901 | $45.84 | 3901 | $53.40 | 4901 | $59.64 | 5901 | $74.40 |
| Shank | 2902 | $50.16 | 3902 | $59.26 | 4902 | $65.52 | 5902 | $87.36 |
| Center Guide | 2903 | $18.72 | 3903 | $21.96 | 4903 | $23.76 | 5903 | $28.80 |
| Retainer | 2904 | $2.98 | 3904 | $3.26 | 4904 | $3.36 | 5904 | $3.78 |
| Spring | 2905 | $1.34 | 3905 | $1.45 | 4905 | $1.56 | 5905 | $1.94 |
| Pin | 2906 | $0.42 | 3906 | $0.44 | 4906 | $0.48 | 5906 | $0.70 |
| Key | 2907 | $3.72 | 3907 | $4.06 | 4907 | $4.32 | 5907 | $4.68 |
| Key Screw | 2948 | $0.48 | 2948 | $0.48 | 2948 | $0.48 | 5908 | $0.55 |
Please specify MODEL / PART number and LISTED PRICE when ordering.
All orders are shipped FOB Clearwater, Florida.
* Manufacturer's Suggested Retail Price -
Prices are subject to change without notice.
copyright (c) 2004 Brookfield Tool Co.
